Aluminum Hydraulic Manifold Design Considerations
Aluminum hydraulic manifold in the design, the oil circuit as simple as possible, minimise deep holes, oblique holes, process holes. In designing an aluminum hydraulic manifold, you should ensure that the hole diameter matches the flow requirements. Pay special attention to providing sufficient circulation area for through-holes, positioning the inlet and outlet ports, arranging the overall system layout, and connecting the pipelines. Also, consider the installation and operational aspects of the craft. Components with vertical or horizontal installation requirements shall meet the requirements after installation.
For the parts that need to be adjusted in the work, the design should consider the convenience of operation and observation. For example, you should position adjustable parts such as relief valves and speed control valves where the adjusting handle is easy to operate.
Components and key parts that require frequent maintenance, such as proportional valves and servo valves, should be located above or outside the valve block to facilitate disassembly. In addition, you should set a sufficient number of pressure measurement points in the design of the valve block for its commissioning. For valve blocks with a total weight of more than 30kg, lifting screw holes should be provided, but the volume of the block should be as small as possible under the premise of meeting the usage requirements.
Advantages of aluminum hydraulic manifold
A hydraulic valve controls hydraulic oil through various operational methods. We usually use hydraulic valves in conjunction with solenoid valves to facilitate automatic control. We can use these valves for remote control of oil, gas, and water pipelines in hydroelectric power stations. Hydraulic valves can be divided into pressure control valves, flow (speed) control valves, directional control valves and so on. In order to achieve the composite action or function of the comparative load, it is necessary to cooperate with a number of valves to complete the corresponding control. The connection between hydraulic valves requires a aluminum hydraulic manifold. The use of hydraulic valve block, can more easily achieve the standardisation and modularity of hydraulic design, and at the same time significantly improve the flexibility and convenience of the design. Aluminum hydraulic manifold also reduce costs by making hydraulic systems more compact and integrated.
Contact Zhuo Yi Control Technology for the latest production technology!
