Technical-Guidance

Most of the power losses in hydraulic equipment are turned into heat that raises the temperature of the oil. Hydraulic media are greatly affected by temperature and can have various negative effects. Therefore, the hydraulic medium must exhibit good temperature…

Selection principles and steps The correct and reasonable selection of the working medium for the hydraulic system is essential, as it allows the system to adapt to various environmental conditions. This thoughtful choice not only helps extend the life of…

Hydraulic cylinder design should first master the original information and design basis, including: the use of the host and the work of the article out: the structural characteristics of the working mechanism, the load condition, stroke size and action requirements;…

ZY420T Injection Molding Machine Hydraulic Manifold SeriesZhuo Yi Supplier Profile: Zhuo Yi supplier of Henggong Precision Equipment Co., Ltd. focuses on the research and development, production and processing, sales and service of new materials of fluid science and technology, and…

The hydraulic system serves as the central system of the hydraulic power control unit, and abnormal oil flow usually causes its failure. Working fluids or external flows can cause oil flow, or internal leaks can lead to it. Impurities in…

1、 Hydraulic power drive unit oil temperature is too high: When the oil temperature in the hydraulic power drive unit exceeds 60 ° C, it will make the viscosity of the oil reduced, the leakage increases, but also produces a…

The hydraulic solenoid valve 12 volt has a closed chamber with open holes at different locations. Each hole connects to a different oil pipe. The piston is located in the middle of the chamber. There are two solenoids on either…

The hydraulic power unit AC supplies oil and connects to multiple hydraulic cylinders through an external pipework system. It controls the actions of several sets of valves. It consists of an oil tank, oil pump, and accumulator, forming an independent…

Principle and types of hydraulic solenoid valve 12v The principle divides the 12V hydraulic solenoid valve into three main categories.: 1、Directly operated solenoid valve Principle: when energised, the solenoid coil generates electromagnetic force to lift the closing member from the…

The hydraulic power pack units hydraulic system uses oil as the working medium. It utilizes oil pressure energy and, through control valves and other accessories, manipulates the hydraulic actuator’s work. This entire set of devices can produce a lot of…